G100 CO2 INCUBATOR ANALYZER |
POWER SUPPLY |
Battery type | Li Ion |
Battery life | 10 Hours (8 hours with pump) |
Battery lifetime | >300 Cycles |
Battery charger | 5v DC external power supply and internal charging circuit |
Charge time | 3 Hours |
Alternative power | USB connector DC power supply |
GAS RANGES |
Gases Measured | CO2 | By custom dual wavelength infra-red cell with reference channel |
O2 (Optional) | By internal electrochemical cell |
Oxygen cell lifetime | Approximately 3 years in air |
Range | CO2 O2 | 0-20% 0-100% |
Measurement Accuracy | Gas |
CO2 O2 | ± 1% of range after calibration ± 1% of range after calibration |
Response time, T(90) | CO2 O2 | ≤ 20 seconds ≤ 60 seconds |
* plus accuracy of calibration gas used |
FACILITIES |
Temperature (Optional) | X2 using optional probes, range 32 °F to 122 °F (0 °C to +50 °C) |
Temperature accuracy, typical | ± 0.2 °C over the range (± 0.1 °C between 32-44 °C) |
Barometric pressure | 800-1200 mbar |
RH measurement (Optional) | RH Probe 0-100% RH non condensing |
RH accuracy | ±1.5%RH across the range |
Visual and audible alarm | User selectable CO2 and O2 alarm levels |
Communications | USB type B mini-connector, HID device class |
Data Storage | 1000 reading sets + 270 events |
PUMP |
Flow | 100cc/min typically |
ENVIRONMENTAL CONDITIONS |
Operating temperature | 41 °F to 104 °F (5 °C to +40 °C) |
Relative humidity | 0 - 95% non condensing |
Barometric pressure | ±201 H2O from calibration pressure, (±500mbar) |
PHYSICAL |
Weight | 1.1 lbs 495 grams |
Size | L 6.5 in, W 3.9 in, D 2.2 in (L 165mm, W100mm, D55mm) |
Case Material | ABS / Polypropylene with Silicone Rubber Inserts |
Keys | 17 Resin capped Silicone rubber keys |
Display | Liquid crystal display, 128 x 64 pixel With RGB LED back-light |
Gas sample filters | Built-in gas dryer tube to remove moisture User replaceable PTFE water trap filter |