S93-574, BradMate Washfountain with Infrared Control
Features:
- Serves 1 - 2 users at a time
- Preassembled for fast, easy installation
- Saves water, energy, and space
- Highly vandal resistant
- ADA Compliant
Operating water pressure range is 20–80 psi. Flow regulators keep flow rate constant at all pressures. A flow restrictor keeps the flow rate at constant a .5 GPM under any pressure.
Each of the stream formers is controlled by a separate solenoid valve. Hands placed within the bowl are detected by an infrared sensor, which activates a flow of tempered water from one spray nozzle. Shut-off is automatic after hands are removed from the detection area. The infrared sensor module uses two zone-focused infrared transmitting beams, having a detection area adapted to, but not exceeding, the bowl perimeter. The detection range projects 6–9 inches forward at a 30° angle to each side and reaches 15° below horizontal. The infrared sensor is not affected by varying color tones or darkness. Direct sunlight or bright washroom lights will not activate the system. Infrared models also include solenoid valves and a low voltage transform as standard equipment: Solenoid – 12VDC, 3/8" NPT tube fitting. Few moving parts, and resistant to most chemicals, minerals, and impurities often present in municipal water supplies. Low-Voltage plug-in adapter – UL/CSA-listed 120VAC/12VDC plug-in adapter. Plugs into a standard GFCI protected electrical outlet. Location of transformer per local electrical code
Accommodates 1-2 users at a time, using less water, energy and space than two lavs equipped with conventional faucets. The stainless steel sprayhead is actuated by one of two push buttons
Valves and Fittings In addition to the bowl assembly and trap enclosure, the following valves and fittings are standard: Navigator® thermostatic mixing valve, flexible stainless steel supply hoses and stops. Stop valves are 1/2" compression female.
Bowl Assembly Bowl, backsplash, sprayhead and trap cover constructed of heavy gauge type 304 stainless steel. All exposed stainless steel surfaces are polished to a #4 satin finish. BradMate™ washfountains are shipped preassembled. Trap, enclosure and flexible supply hoses are included with BradMates for connection during installation.
Vandal Resistance The stainless steel sprayhead and push buttons are secured to the bowl from inside the washfountain. All valves, sensors, supplies and waste connections are safely concealed inside the washfountain.