S93-573, BradMate Washfountain with TouchTime Activation
Features:
- Serves One to Two Users at a Time
- TouchTime Mechanical Metering
- Preassembled for Fast and Easy Installation
- Saves Water, Energy and Space
- Highly Vandal Resistant
- ADA Compliant
Operating water pressure range is 20–80 psi. Flow regulators keep flow rate constant at all pressures. A flow restrictor keeps the flow rate at constant a .5 GPM under any pressure.
Each low-voltage button actuates a non-hold-open, slow-closing anti-hammer solenoid valve that is timed from an electronic potted assembly. Each push button activates one valve which, in turn, activates one station. TouchTime controls water flow at each station through the use of solid state, digital circuitry. Timing is factory set at a 15 second run time, but is field adjustable. The 24 hour flush function will activate water flow for a period of 60 seconds any time there has been no activation within the past 24 hours. Push button requires less than five pounds of pressure.
Accommodates 1-2 users at a time, using less water, energy and space than two lavs equipped with conventional faucets. The stainless steel sprayhead is actuated by one of two push buttons
Valves and Fittings In addition to the bowl assembly and trap enclosure, the following valves and fittings are standard: Navigator® thermostatic mixing valve, flexible stainless steel supply hoses and stops. Stop valves are 1/2" compression female.
Bowl Assembly Bowl, backsplash, sprayhead and trap cover constructed of heavy gauge type 304 stainless steel. All exposed stainless steel surfaces are polished to a #4 satin finish. BradMate™ washfountains are shipped preassembled. Trap, enclosure and flexible supply hoses are included with BradMates for connection during installation.
Vandal Resistance The stainless steel sprayhead and push buttons are secured to the bowl from inside the washfountain. All valves, sensors, supplies and waste connections are safely concealed inside the washfountain.